In summer, there are hard to endure the heat, and there is a rushing dry season. The most worrying thing is that the sky was still sunny just now, and it was overcast and rainy in the blink of an eye. In the summer mode, the electricity load surges, and the dry season is humid, so you need to always pay attention to the safety of electricity use. After a series of rainy days, the switch sockets in the home have problems with the operation? The reason may be that you did not treat the switch socket correctly! If you do not carefully protect and maintain the switch sockets due to the favorable terrain of rain, the copper core will gradually oxidize and corrode, reducing the service life of the smart switch sockets! There are even more opportunities to cause safety hazards such as overload and short circuit! At this time, we can no longer say "the rain girl has no melons".
1. The switch socket is damp in rainy weather. In rainy or humid environment, the internal parts of the switch socket will be affected by water vapor, which will corrode the copper core and deteriorate the conductivity. When it rains, close the doors and windows to prevent rainwater from splashing in. When the rain stops, you must be careful to open the doors and windows to maintain ventilation. The switch sockets of the kitchen, bathroom and balcony are better equipped with waterproof boxes!
2. Mildew stains appear on the switch socket. When it rains and wet, the panel of the switch socket may appear mildew. At this time, stop using it. Remember not to wipe it with a wet cloth, just wipe it with a dry cloth or alcohol!
3. Water enters the wall socket. What should I do if water enters the socket accidentally when it rains? First of all, turn off the corresponding power supply of the switch socket. If the water ingress is not severe, you can wipe it with a dry cloth. If the water ingress is severe, you must open the panel to wipe and dry. Finally, remember to wait until the socket is completely dry before using it.
4. Leakage tripping on rainy days, if there is a leakage tripping on rainy days, you must be alert! Leakage tripping may be caused by water leakage or water seepage in the wall. Rainwater leakage will affect the use of wires and switch sockets. Severe conditions will lead to safety hazards such as leakage and short circuit! So you need to find a decorator or electrician for specific inspections! In addition to correct treatment and maintenance of switch sockets, the selection of exquisitely manufactured and high-quality switch sockets, a reasonable strategy for safe electricity use in dry seasons, can also greatly threaten the safety of electricity use in wet and rainy days!
