What should be paid attention to in the design of smart switch socket? Aspect ratio: The switch power switch is generally between 120 cm and 135 cm away from the road (the general switch aspect ratio is as high as the shoulder of an adult)
The wall power sockets for audio-visual equipment, small desk lamps, power strips, etc. are generally 30cm away from the road surface (the power sockets of the large living room depend on the TV cabinet and the fabric sofa). The power socket of the automatic washing machine is 120cm to 150cm away from the road surface, the power socket of the household refrigerator is 150cm to 180cm, the power socket of the central air conditioner and exhaust fan is 190cm to 200cm away from the road surface; the power socket of the restaurant and kitchen is 1100 high from the ground, and one at 600 intervals .
The European classical detachment part is generally suitable for the vertical axis to be set in the middle of 2200mm from the ground. The horizontal coordinate axis must determine the upper and lower length of the smoking machine itself, so it is not easy to make the power cord plug collide with the part of the detachment back wall. The power socket is located in the detachment. In the middle of the pipe;
Location: Generally, the switch is switched with one hand with the direction reversed, and the left hand does not need the right hand. Therefore, most of the switches in the home are installed on the left side of the entrance, so that it can be opened with the left hand after the entrance. In line with the logic of personal behavior.
However, there are preconditions for this situation, and everyone must ensure the establishment of such preconditions:
1. The opening direction of the entrance door adjacent to the switch is the right side.
2. The aspect ratio of the furniture before the door switch (must be aware that the furniture has shoe racks, large cabinets, five-bucket kitchens, etc.. It does not need to be wider or higher than the switch, which will result in the usual application unchanged.
3. It is recommended to use reminder lights for general entrance switches to provide convenience for nighttime applications. Otherwise the wall next to the switch will be dirty for a long time. And exploring lighting, has always brought a lot of mental pressure to the timid MM.
Connect the multiple switch:
The multi-switch is a switch with many function keys on it, which can operate several light switches.
1. In the case where the welder is required to connect the multi-switch, there must be a logical specification, or follow the direction of the light in the order of front, back, left, and right, one by one.
2. If the exhaust system switch of the restaurant kitchen must be connected to multiple switches, put it on the last switch. The switch that controls the light in the middle does not need to be disconnected, so the function is separate, which is conducive to memory after being turned on. Otherwise, it is often to find the light you want to turn on and turn on all the switches.
Double control switch or three control switch:
This switch is very effective. When everyone is lying in bed and watching TV series, in order to decide who gets up to turn off the lights, the dual-control switch can handle this problem.
There are also frequently used areas: the living balcony on both sides of the large living room in the middle of the dining room and the large living room depends on each person's lifestyle, so pay more attention when considering it, and then talk less about the shortcomings.
